Tsuyo Manufacturing Private Limited (Tsuyo), India’s leading e-mobility component manufacturing company and a pioneer in integrated electric vehicle powertrain technologies, has earned a place among 120 startups selected for Bharat Innovates 2026. This flagship initiative is overseen by India’s Ministry of Education and aims to identify and support the nation’s most promising technology ventures.

The selection underscores Tsuyo’s rising contribution to the domestic electric mobility sector, particularly through the development of advanced powertrain solutions. By focusing on indigenous capabilities, the company supports India’s goal of self-reliance in clean mobility and assists original equipment manufacturers in accelerating electric vehicle adoption across multiple vehicle categories.

Bharat Innovates 2026 will take place in Nice, France, from 14 to 16 June. Announced by Prime Minister Narendra Modi on 17 February 2026 during the India-France Year of Innovation, the programme is designed to mentor high-potential startups and showcase them globally. Through this platform, Tsuyo will gain mentorship, networking opportunities and international visibility to further expand its technological reach.

With two manufacturing plants in Greater Noida and over 200,000 motors sold to more than 50 original equipment manufacturers, Tsuyo leads the mid-drive electric motor segment in India. Its products serve three-wheelers, light commercial vehicles, medium and heavy commercial vehicles and off-road applications, with powertrain systems ranging from 0.5 kW to 400 kW. Continued investment in research and development keeps the company committed to India’s sustainability and manufacturing ambitions.

Vijay Kumar, Founder & CEO, Tsuyo Manufacturing Private Limited, said, "This milestone is the advocacy of the incessant effort of the entire Tsuyo team. It affirms our vision of developing globally advanced, adaptable and affordable EV powertrain technologies that are both designed and manufactured in India. As the nation accelerates its shift towards sustainable mobility, indigenous innovation will be the right pivot towards enhancing supply chain resilience, reducing technological dependence and positioning India as a global hub for electric mobility. We are eager to utilise this platform to highlight India's engineering prowess and engage with global stakeholders who share our commitment to sustainable transportation.”

Lalit Baid, Founder & COO, Tsuyo Manufacturing Private Limited, said, "Bharat Innovates 2026 offers a unique opportunity for technology companies to collaborate, learn and expand. At Tsuyo, our focus has consistently been on developing high-performance, reliable and cost-effective powertrain solutions which must meet the evolving demands of the EV industry. A key pillar of our innovation is our work on sustainable motor manufacturing without rare-earth magnets – reducing dependence on critical mineral supply chains and eliminating the geopolitical risk that comes with China-dominated RE magnet sourcing. Participation in this initiative will enable us to further enhance our innovation roadmap, forge meaningful partnerships and contribute to India's goal of becoming a global leader in electric mobility technologies."

Comments (0)

ADD COMMENT

Link Copied!

French tier 1 supplier Valeo has announced the appointment of Jean-Luc Terrasse as the CEO of Valeo Light Division and Group Executive Vice-President, effective 1 July 2026. He succeeds Maurizio Martinelli, who is set to retire after spending close to 26 years at Valoe.

In his new role, Terrasse will report to Christophe Perillat, CEO of Valeo, and will also join the Executive Committee.

Terrasse has held leadership roles in operations across Europe and South America during his three-decade career. He first joined Valeo in 1989 and has served in business units including Engine Management Systems, Body Electronics and Special Lighting Products. In 2016, he became Vice-President of Valeo’s Wiper Systems group.

During his career, he has worked with the likes of Alstom Grid, Johnson Controls Automotive and Safran.

Christophe Perillat, said, “The LIGHT division plays a key role in our strategic plan ELEVATE 2028, through its road map towards profitable growth and the promise of a safer mobility. Jean-Luc has extensive knowledge of the market and a deep knowledge of Valeo’s culture and industrial excellence. I am fully confident that in his new role as CEO of the Valeo Light Division and Group Executive Vice President, he will continue driving international growth and be invaluable as we continue to pioneer the future of automotive security and comfort.”

“On behalf of the Group, I warmly thank Maurizio Martinelli for his 26 years of dedication to Valeo, notably as CEO of Valeo Light Division. Maurizio played a key role in building our technological leadership. We thank him for his exceptional impact and wish him a very happy and well-deserved retirement,” said Terrasse.

Comments (0)

ADD COMMENT

Link Copied!

German component supplier Knorr-Bremse will present technologies for zero-emission commercial vehicles at the IAA Transportation 2026, Hanover. The company aims to provide system solutions to help manufacturers reduce CO2, noise, oil and particulate emissions.

The company is set to showcase Electric Vehicle Motion Control (eVMC), wherein the software is designed to optimise energy recovery through brake control within the Global Scalable Brake Control (GSBC) system.

A Electric Power Steering (EPS) system scheduled for launch in 2027 that operates on a power-on-demand principle to reduce energy consumption.

An oil-free electric air supply system designed for efficiency across various vehicle platforms. The Multi Tumble Piston (MTP) Compressor is set to debut at the IAA Transportation 2026.

A eSilencer component developed to lower noise emissions from pneumatic braking systems to 68 dB(A).

Lastly, a liquid-cooled Power Resistor (iMEP) system intended to provide braking performance independent of battery state.

Bernd Spies, Member of the Executive Board, Knorr-Bremse, said, “Zero emissions in road transport remains our clear goal. At the same time, we see very different paces and framework conditions for this transformation around the world. In this environment, Knorr-Bremse is a stable and reliable development partner for commercial vehicle manufacturers. We bring together technology, regulations, and cost-effectiveness – with flexible system solutions on the path to zero-emission commercial vehicles, without compromising on safety and performance.”

To address the EURO 7 standard, Knorr-Bremse has developed wheel end technologies, including the SYNACT disc brake family. These systems feature Active Caliper Release (ACR) and an NVH toolbox to manage noise and fuel consumption.

Comments (0)

ADD COMMENT

Link Copied!

German multinational chemical company Henkel has announced the appointment of Pradhyumna Ingle as Country President for India. Based in Navi Mumbai, he will lead the company’s growth strategy, market expansion and innovation initiatives.

Pradhyumna will balance his new responsibilities with his existing global leadership roles within Henkel Adhesive Technologies, where he serves as: Global Head – Infrastructure Protection & Repair and IMEA Head – Manufacturing & Maintenance.

He succeeds S. Sunil Kumar, who has led Henkel India for the past five years and will now relocate to Dubai to oversee strategic projects for the IMEA region alongside his duties as Director of Packaging for IMEA.

The company says Pradhyumna comes with over 25 years of leadership experience across multiple regions, including the Asia Pacific, North America and the Middle East & Africa. He has rich experience in driving acquisitions, digital business models and high-performance organisations.

Ashraf Elafifi, IMEA President, Henkel, said, “Pradhyumna brings a unique combination of global perspective, deep market understanding, customer-centricity, and proven leadership in driving transformation and sustainable growth.”

Pradhyumna highlighted the potential of the Indian market, noting that Henkel is positioned to contribute to sectors such as infrastructure, mobility, electronics and energy.

“I am excited to work with our talented teams across India to further strengthen our market position, expand our local innovation capabilities, and deliver sustainable growth for our customers, employees, partners, and communities,” said Pradhyumna.

Comments (0)

ADD COMMENT

Link Copied!

Switzerland-based international technology and market leader in electrolamination stamping, fineblanking and forming company Feintool has officially inaugurated its first manufacturing site in India, located in Pune.

The facility, which has begun ramping up production, is designed to support the local automotive market with high-precision fineblanked components. The company had earmarked an initial investment of CHF 15 million (approx USD 19 million) towards the facility, which will produce seat adjusters for various major automotive manufacturers in India.

The company has adopted a ‘local-for-local’ approach, allowing it to supply automotive customers directly within the Indian market. This move is intended to reduce reliance on long-distance supply chains and respond to the growth of India’s automotive sector, which is the third-largest in the world.

Lars Reich, CEO, Feintool, said, “Feintool is proud to meet its customers’ demand for local production in India with the facility in Pune. We are in the right place at the right time to benefit sustainably from the momentum in the Indian automotive industry and to capitalise on further opportunities in the growing industrial markets in India.”

Initial operations at the Pune site are focused on the production of fine-blanked automotive seating systems. However, the facility is designed to support future expansion into additional core technologies, including cold forming, e-lamination stamping (for e-motor cores) and hydrogen applications.

Tobias Gries, Managing Director, Feintool India, said, “We have established a strong team in India. With Feintool’s global expertise, we are now ramping up production in Pune—starting with fineblanked automotive seating systems. Looking ahead, we are ready to expand into cold forming, e-motor core production and even hydrogen applications. The plant is fully prepared for further expansion as demand develops.”

This new site joins Feintool’s network of 18 production facilities across Europe, Asia, and the United States.

Comments (0)

ADD COMMENT

Link Copied!