Force Motors, India's largest van maker, reported a strong 59 percent YoY growth in domestic wholesale for November 2025, as compared to last year.

The company attributed the surge in sales to the rapid scaling of the Urbania and Trax platforms, both of which now contribute a higher share to overall volumes. Trax, in particular, has benefited from the recent GST rationalisation on rural mobility categories, which has improved affordability and accelerated replacement demand across rural and semi-urban markets.

Traveller, the company’s people-mobility platform, continues to anchor volumes with consistency and year-to-date growth, while the Monobus recorded sustained traction through increased institutional and state transport requirements.

For April to November 2025, Force Motors registered a 23 percent year-to-date growth, driven by adoption of new-generation platforms and improved demand across core customer segments.

Prasan Firodia, Managing Director, Force Motors, said, “We are pleased with the sustainable growth in our domestic sales, which reflects the strong customer confidence in our range of reliable and robust vehicles. While domestic wholesales grew by 59 percent in November 2025, overall volumes were moderated by expected fluctuations in export dispatches, which typically vary based on shipment cycles across international markets. Despite this, total wholesales still registered a strong 53 percent YoY increase, underscoring the company’s resilient growth trajectory”.

The company continues to see rising demand across key sectors including rural transportation, staff carriers and goods movement. Force Motors remains committed to innovation and customer satisfaction, ensuring performance and low total cost of ownership.

Comments (0)

ADD COMMENT

Link Copied!

Tata Motors, one of the leading commercial vehicle manufacturers globally, has presented a portfolio of 11 products at an exhibition in South Africa.

The display includes a range of vehicle platforms and powertrain technologies, including electric vehicles and traditional internal combustion models, designed for international market applications.

Tata Motors displayed four zero-emission models developed for specific cargo and industrial duties, which include Tata Ace Pro EV, Tata Intra EV, Tata Ultra E.9 and Prima E28.K.

The display also featured next-generation intermediate trucks and mass mobility passenger buses – Intra V30 & V70, Azura 1918, Ultra Prime RE and long-distance buses, the LPO 1618 Magna (44-seater), LPO 1623 Nova (49-seater premium coach), and the LP 909 school and staff transport bus.

Tata Motors maintains a presence across 29 countries in Sub-Saharan Africa, with cumulative regional sales exceeding 340,000 commercial vehicles. The company provides a lineup of over 60 models supported by a network of more than 320 service touchpoints. To support its regional supply chain, the company utilises seven local assembly operations located in South Africa, Kenya, Nigeria, Senegal, Egypt, Morocco, and Tunisia.

Asif Shamim, Head of International Business, Tata Motors, said, “This showcase reflects our continued focus on developing relevant, application‑led mobility solutions for our international markets. The portfolio presented here demonstrates the range of platforms and technologies we are building across segments, including electric vehicles, tailored to different use cases and operating conditions. It also reflects the strength of the engineering and development capabilities behind these products, enabling us to deliver solutions that are practical, reliable and built to support customer productivity.”

Comments (0)

ADD COMMENT

Link Copied!

German technology company Bosch has announced a new joint venture with Brakes India (BIPL) and Wheels India (WIL), both companies of the TSF Group, to advance the development and manufacturing of air systems for commercial vehicles.

The partnership is structured as a 50:50 joint venture between Bosch and the TSF Group companies and is expected to begin operations by end-2026, pending regulatory approvals.

The joint venture will concentrate on the engineering, manufacturing and sales of electronically controlled and software-driven modules. The product portfolio will include systems for – air compression, air processing, air suspension and air parking brakes.

The entity will be headquartered in Chennai, with supply chain management integrated across Bosch, Brakes India and Wheels India.

Guruprasad Mudlapur, President, Bosch Group in India and MD, Bosch, said, “This joint venture is a decisive step to shape the future of advanced air systems. By integrating premier engineering and manufacturing prowess, we are co-creating state-of-the-art, intelligent modules that will empower our customers globally to build more advanced commercial vehicles.”

Sandeep Nelamangala, Joint MD, Bosch and President of Bosch Mobility India, said, “The commercial vehicle industry is at a pivotal moment, shifting from mechanical hardware to software-driven architecture. With air systems being an important portfolio extension, the planned joint venture enhances Bosch’s overall commercial vehicle motion management portfolio, strengthening its role in software-driven mobility.”

Sriram Viji, MD, Brakes India, said, “This milestone marks a step towards building a more integrated, system-level approach for OEMs in the commercial vehicle space. We bring our strengths as one of the leading suppliers of pneumatic braking systems. Through this joint venture, we will be able to offer air braking system parts for e-enabled future mobility to customers. We look forward to supporting the industry’s shift towards more advanced, electronically controlled and software-driven systems.”

Srivats Ram, Chairman & Managing Director of Wheels India, added, “Wheels India has been a pioneer in air suspension systems for buses in India for over three decades. Over this period, we have built strong relationships with both OEMs and end users through consistent product quality and service. We are pleased to collaborate with Bosch on this development initiative to advance electronic air suspension systems for the global customers.”

Comments (0)

ADD COMMENT

Link Copied!

The Automotive Research Association of India (ARAI), a leading automotive R&D organisation set up by the automotive industry with the Government of India, has launched a series of administrative and technical initiatives to support bus body builders navigating the national certification framework.

The updates are structured to lower compliance expenses, minimise paperwork and reduce the processing timeline for vehicle type approval.

Under the updated framework, ARAI has established a Support Cell to assist manufacturers with documentation and pre-application design verification. The association has also introduced a website containing regulatory guidelines and simplified data templates, such as standardised variant lists and checklists, to address Worst-Case Selection Criteria.

Applicants must follow a three-level compliance architecture that incorporates physical safety verifications and mandatory video inspections.

The system enforces the Bus Body Code, implemented under the Motor Vehicles Act, 1988, and the Central Motor Vehicles Rules (CMVR), to standardise vehicle construction and safety metrics across the manufacturing sector. The rules require compliance with distinct Automotive Industry Standards (AIS):

• AIS 052 (Rev.1): Governs structural requirements and design safety for all buses with a seating capacity of 13 passengers plus the driver (13+D) and above, as mandated by GSR 159 (E).
• AIS 153: Sets safety criteria, fire protection rules, emergency exit locations, and passenger comfort standards for buses exceeding a 22-passenger capacity, excluding the driver (22+D).
• Specialised Standards: Includes AIS-119 (Rev.1) for sleeper coaches and AIS-063 for school buses.

The operational updates follow a regulatory directive issued by the Ministry of Road Transport & Highways (MoRTH). Regional Transport Offices (RTOs) are restricted from registering new inter-city and sleeper buses until completed safety checklists are uploaded directly to the government’s VAHAN portal by manufacturers, body builders and inspecting officers.

Dr Reji Mathai, Director, ARAI, said, “ARAI has always been committed to empowering ecosystem stakeholders be it legacy corporations, start-ups or MSMEs. We want to assist the bus body builders in their certification process at all stages including development and testing before they apply for certification. This will ensure that safety remains our utmost priority and consequently a reliable transport system for the public is built in our country. To encourage widespread adoption of these services, we have also introduced substantially optimised pricing structures. We aim to make it easier, faster and cost-effective for all stakeholders to uphold the best standards of passenger safety. The type approval cost had been drastically reduced to INR 1.4 million + GST, which is about 50 percent reduction from a normal case. Additionally, time for type approval process can be fast forwarded to anywhere between 60 days – 90 days, depending upon the readiness of the applicant.”

The revision limits the baseline type approval fee to INR 1.4 million plus GST for applications containing up to 100 vehicle variants, while the processing window has been adjusted to run between 60 and 90 days depending on initial applicant documentation.

Comments (0)

ADD COMMENT

Link Copied!

German automotive major MAN Truck & Bus recently unveiled the MAN eTGM at the Transpotec Logitec trade fair in Milan, expanding its battery-electric vehicle line-up into the mid-range distribution segment.

The introduction of the 16-tonne truck establishes a uniform electric commercial vehicle portfolio ranging from 12 to 50 tonnes, bridging the gap between the lightweight eTGL and the heavy-duty eTGX and eTGS series.

The e-truck features a permissible gross weight of 16.01 tonnes (with a 16.5-tonne option) and a chassis payload capacity of approximately 10.6 tonnes. It is designed for urban and regional distribution, municipal use and construction transport, the e-truck also supports trailer operations up to a gross combination weight of 33 tonnes. Operating in the over 16-tonne category provides transport companies with road toll reductions in several European markets while assisting fleets in meeting EU CO2 emissions targets.

The eTGM utilises a modular battery-electric system derived from MAN’s heavy-duty truck platforms. It is powered by the MAN eCD210 electric drive, which produces 210 kW (285 hp) and a maximum torque of 800 Nm, paired with a MAN TipMatic 2 transmission. Operators can configure the vehicle with two to four battery packs, providing a total usable capacity of up to 320 kWh and a maximum operating range of 480 kilometres.

Friedrich Baumann, Member of the Executive Board for Sales & Customer Solutions at MAN Truck & Bus, said, "With the MAN eTGM, we are putting the ideal electric solution for inner-city and regional distribution transport on the road right now. It is the logical conclusion to our eTruck portfolio and makes MAN a true full-range supplier of battery-electric commercial vehicles."

For body assembly, the chassis includes optimised wheelbases, standardised interfaces and a mechanical power take-off shaft (mPTO) to allow the integration of conventional body designs without extensive modification. Alongside the eTGM premiere, MAN showcased its broader decarbonisation ecosystem at the trade fair, including the heavy-duty eTGX equipped with Megawatt Charging System (MCS) technology, charging consultancy services and digital fleet connectivity tools.

Comments (0)

ADD COMMENT

Link Copied!