NXP Semiconductors has launched the NXP CoreRide Z248, a zonal reference system combining 48V energy distribution with data routing. The hardware-software foundation is designed to assist OEMs and Tier 1 suppliers in transitioning to software-defined vehicle (SDV) architectures by reducing integration effort and development cycles.

The Z248 is built on NXP’s S32K5 microcontroller series, featuring on-chip Magnetic Random Access Memory (MRAM). This technology is intended to accelerate electronic control unit (ECU) programming during manufacturing and over-the-air (OTA) updates.

The system integrates several 48V-capable components and networking tools:

• Power Management: Includes eFuses, Power Management Integrated Circuits (PMICs), and DC-DC converters for energy conversion and protection.
• Networking: Features Ethernet PHY and CAN transceivers for data handling.
• Software Stack: A pre-validated stack managing smart data energy network (SDEN) functions such as impedance monitoring and diagnostics.
• Safety: Built-in functional safety and real-time responsiveness for zonal processing.

NXP stated it has validated the Z248 through system-level tests focusing on low-power modes and wake-up response times. The package includes a Board Support Package (BSP) with integrated software from partners including GLIWA for performance monitoring, Green Hills Software for compilers and Vector for embedded tools.

The reference system is designed for deployment across internal combustion engine (ICE), hybrid, and battery electric vehicle (BEV) platforms. It supports ECU consolidation by managing energy distribution and data protocols within a single architecture.

Sebastien Clamagirand, SVP and General Manager, Automotive Systems & Platforms, NXP Semiconductors, said, “The NXP CoreRide zonal reference system Z248 delivers a performance-optimized, scalable 48 V foundation that intelligently fuses power, data and software, while dramatically simplifying system integration, reducing time to market, and enabling OEMs to focus on vehicle differentiation and long‑term value creation.”

Peter Gliwa, CEO and Founder, GLIWA, added, “NXP understood that the eco-system, the tooling around a new platform is essential for its success. With our Analysis Suite T1 built into the NXP CoreRide Z248 zonal reference system, high efficiency, proper timing analysis and timing verification are very well addressed.”

Jochen Rein, SVP Business Unit Software Platform, Vector, stated, “The combination of the NXP CoreRide platform and Vector’s software foundation provides a robust basis for next‑generation zonal architectures. We enable our joint customers to reduce their time- to-market due to a pre-integrated and highly optimized software stack.”

Comments (0)

ADD COMMENT

Link Copied!

Affordable Robotic & Automation (ARAPL) has announced that its subsidiary ARAPL RaaS, operating under the Humro brand, has received Conditional Approval from the US Department of War for its specified autonomous industrial vehicles under the US Federal Communications Commission (FCC) framework.

The approval, issued by the FCC following national security assessments, covers Humro’s Maia2000 autonomous pallet trucks and Atlas AC2000 autonomous forklifts. The decision grants the specified devices exemption from FCC Covered List restrictions, which were introduced in July 2026 for foreign-produced robotic devices.

Humro is among 13 global robotics operators, and the only Indian entity, to receive conditional authorization under the updated guidelines. The approval enables the company to enter the US material-handling market, subject to compliance with onshoring plans, local manufacturing commitments over the next two years, and equipment authorisation requirements.

Robinson Philipose, Co-Founder and Chief Executive Officer, Humro, said, "This is a significant milestone for Humro and an important validation of our technology and our commitment to building globally competitive robotics solutions. Being among the first few robotics companies worldwide to receive Conditional Approval under the revised US regulatory framework is a matter of great pride for us."

"Following the regulatory changes, our team worked relentlessly to replace certain key components that did not meet the revised guidelines. This also required us to make corresponding changes to our technology to ensure compliance. We completed the modifications, submitted our application and secured FCC approval within a remarkably short period. This demonstrates the agility and technical capabilities of our team. The approval strengthens our position as we look to expand our international footprint and take our autonomous material-handling solutions to customers in the US. We see considerable potential for robotics to transform warehouse, manufacturing and logistics operations. As part of the Conditional Approval, we are also committed to commencing manufacturing in the US in phases over the next two years. We are actively looking to partner with like-minded local players to establish our manufacturing operations in the country," Philipose.

Melind Padole, Founder and Director, ARAPL Group, said, "These are exciting times, with our teams in the US and India expanding rapidly. Securing FCC approval within such a short period demonstrates the strength of our team and the capabilities of our products. As we prepare to commence manufacturing in the US in line with FCC requirements, we have also begun working towards meeting the requirements of the Buy American Act (BAA) and the Trade Agreements Act (TAA). In parallel, we are developing a new technology platform based on Vision-Language Action models. Our next-generation robots will be more human-like in their ability to perceive, understand and interact with their surroundings, and will incorporate reinforcement learning capabilities. This will enable them to learn from experience, adapt to changing environments and perform increasingly complex tasks."

Comments (0)

ADD COMMENT

Link Copied!

Infineon Technologies has announced a technology agreement with Qualcomm Technologies, Inc. to integrate a microcontroller-based design pattern into Qualcomm's Snapdragon Ride reference platforms for high-performance computing and in-vehicle Artificial Intelligence (AI).

The initiative combines Qualcomm's systems-on-chip (SoC) with Infineon's hardware and software components for safety management, connectivity and memory handling to support centralised architectures in Software-Defined Vehicles (SDVs). The development will be highlighted ahead of the electronica trade fair in Munich.

The subsystem is built around an Infineon AURIX microcontroller and OPTIREG integrated circuits for power management, operating alongside Qualcomm's Snapdragon Ride and Ride Flex platforms to monitor system health, coordinate safety mechanisms and provide real-time control.

The architecture is supported by a dedicated software package designed to pre-integrate firmware and connect with vehicle networks such as Ethernet and CAN. In addition to the microcontroller subsystem, Infineon contributes BRIGHTLANE Automotive Ethernet and USB connectivity devices alongside SEMPER NOR Flash memory qualified for the Snapdragon Ride ecosystem.

Peter Schiefer, President of the Automotive Division, Infineon, said, "With Qualcomm Technologies’ Snapdragon Ride, we enable the automotive industry to build and scale a new generation of car computers that combine tremendous computing and AI capabilities with the reliability required on the road. Our collaboration reflects a fundamental approach to centralised vehicle computing, which combines a powerful SoC with a set of specialised components around it, including a safety microcontroller, power management, connectivity and memory devices. All these components need to work together seamlessly to help enable safe vehicle operation. Infineon provides essential functional building blocks and integration expertise for building the trust foundation for software-defined vehicles that leverage the power of AI."

Comments (0)

ADD COMMENT

Link Copied!

LG Energy Solution has announced the launch of the Battery Innovation Contest 2026 (BIC 2026), inviting universities and research institutions globally to submit research proposals between 29 October and 6 December 2026 via its online open innovation platform, BRIDGE.

Now in its 10^th year, the program aims to identify and fund research concepts with potential for commercialisation across the battery industry. BIC 2026 incorporates two application streams: a thematic call addressing specific development topics identified by LG Energy Solution across materials, cells, battery management systems and artificial intelligence; and an open-topic call permitting researchers to submit original proposals.

To safeguard intellectual property, the contest uses a two-stage evaluation process requiring a brief concept proposal during the initial review before shortlisted applicants submit detailed submissions.

Since 2017, the Battery Innovation Contest has supported approximately 50 research projects. Select projects with verified feasibility have been expanded into longer-term initiatives at the company's Frontier Research Laboratory joint research centres. Previous outcomes include patent filings for physics-based battery management models and research on room-temperature all-solid-state batteries published in academic journals.

Je-Young Kim, CTO, LG Energy Solution, said, "By joining forces, industry and academia can drive innovation across the battery industry. Building on our differentiated technological competitiveness, LG Energy Solution will continue to accelerate its growth in the battery market."

Comments (0)

ADD COMMENT

Link Copied!

Wayve, NVIDIA and Stellantis have announced a joint collaboration alongside the French government at the Assises du Véhicule Autonome to support the deployment of autonomous vehicles in France and across the European Union.

The initiative combines Stellantis’ L4-Ready Platforms with the Wayve AI Driver system, integrating NVIDIA Halos OS on the NVIDIA Hyperion compute and sensor architecture. The collaboration aims to establish an autonomous vehicle value chain in France, spanning silicon development, software integration and vehicle manufacturing.

Local transport partners will engage with trade unions, municipal authorities, and mobility stakeholders to address regulatory alignment, safety requirements, and operational deployment.

Philippe Tabarot, French Minister of Transports, said, "I am pleased to see this collaboration between Wayve, NVIDIA and Stellantis launched at the Autonomous Vehicle Forum in France. France is committed to adapting its regulatory framework to accelerate the development of autonomous vehicles while maintaining strict safety and data sovereignty requirements. By bringing together trade unions, city authorities, and mobility stakeholders, this collaboration embodies the collaborative spirit of the Assises du Véhicule Autonome, as well as the approach required to transition from trials to real-world deployment."

Kaity Fischer, VP Autonomous Mobility & Operations, Wayve, said, "France is leading the way in preparing for autonomous vehicles, and we’re proud to enter this collaboration at such an important moment. By working directly with the French Government and our partners, we can help shape how this technology is deployed safely and responsibly and accelerate its development across the country and entire EU."

Anne Laliron, SVP of Technology Research, Stellantis, said, "This collaboration will help accelerate the delivery of autonomous driving technologies that make mobility safer and more convenient for customers. While its impact is global, France is one of Stellantis’ key centres for engineering and technology development, making it a natural home for advancing the future of AI-powered mobility."

Ali Kani, VP of Automotive, NVIDIA, said, "Bringing safe autonomous mobility to Europe requires deep collaboration across AI, computing and vehicle engineering. NVIDIA Hyperion platform, combined with Wayve’s embodied AI and Stellantis’ automotive expertise, provides a foundation for that ambition. Together with the French Government and local partners, we can help build an ecosystem that brings the benefits of autonomous driving to communities across France and Europe."

Comments (0)

ADD COMMENT

Link Copied!