European tier 1 supplier Marelli has announced it will present its latest in-cabin technologies at Auto China 2026 in Beijing, scheduled from 24 April to 3 May. The showcase focuses on the integration of electronics and interiors to support software-defined vehicles (SDVs) through unified computing and scalable architectures.

The centrepiece of the exhibition is a software-defined cockpit experience that centralises computing, artificial intelligence and human-machine interface (HMI) functions. Built on a QNX real-time operating system (RTOS), the system manages in-vehicle infotainment, cluster visualisation and cabin intelligence within a single architecture.

Key display at its booth includes –

MiniLED FALD Display: An ultra-thin Full Array Local Dimming screen designed for high contrast and sunlight readability, supporting curved pillar-to-pillar configurations.

HorizonView Display: A continuous 44.8-inch image projected across the base of the windshield. Powered by a Picture Generation Unit (PGU) capable of 12,000 nits, it provides a panoramic visual field intended to reduce driver distraction.

Marelli is also introducing a zonal electrical/electronic (E/E) architecture to centralise intelligence and reduce wiring complexity. This approach utilises an ‘edge node’ strategy to remove local microcontrollers (MCUs) from peripheral modules.

MCU-Free Modules: Door and seat modules shift window, mirror, and safety functions to the Zone Control Unit (ZCU) or central compute unit via low-latency protocols.

Zonal Audio: Multi-zone audio distribution is managed at the zonal level, utilising Ethernet-based amplifiers. This configuration eliminates the need for local digital signal processors (DSPs) in every speaker location.

Connectivity: The company will debut an Affordable 5G RedCap (Reduced Capability) telematics solution. It offers 2.5 times lower latency than 4G at a similar cost, supporting over-the-air (OTA) updates and remote diagnostics.

The cabin experience is further defined by mechanical and lighting solutions designed for personalisation and space efficiency:

Cockpit Features: Motorised swivel speakers for directional audio, motorised vents for climate management, and retractable tables for workspace versatility.

Console Design: A multi-access console lid that opens from three sides and a detachable display mechanism for rear-seat passenger access to controls and entertainment.

Joachim Fetzer, Chief Technology and Innovation Officer, Marelli, said, “In the cabin of the future, technology must feel human – intuitive, responsive and seamlessly integrated. At Auto China, we will demonstrate how Marelli unifies compute, display, audio, and interior design into a coherent, software-defined experience enabled by deep local engineering and strong partnerships.”

Comments (0)

ADD COMMENT

Link Copied!

German technology company AUMOVIO will showcase a portfolio of braking, rider assistance and connectivity solutions for motorcycles and powersports vehicles at EICMA 2026 in Milan, scheduled from 3 to 8 November 2026.

The company's showcase centres on the launch of the MK 120 MAB brake system, which extends AUMOVIO's braking product line beyond two-wheeled applications. The system is engineered for three-wheeled scooters, side-by-side vehicles, utility terrain vehicles and all-terrain vehicles.

It integrates vehicle stability functions derived from passenger car and motorcycle architectures, including active yaw control and wheel lift mitigation, to assist vehicle control across varied terrain.

In addition to the MK 120 MAB, AUMOVIO will display its Motorcycle ABS 2.3 Base unit featuring an optional inertial measurement unit, alongside the MiniMAB EVO system designed for small-displacement scooters and commuters.

The company's display also features radar sensors for adaptive cruise control and blind-spot detection, digital instrument clusters ranging from 4 to 8.8 inches, a standalone Connected Infotainment Box and automated manual transmission control units.

The hardware, software and electronic systems on display utilise automotive development, cybersecurity and production standards adapted to motorcycle and powersports operational environments.

Comments (0)

ADD COMMENT

Link Copied!

Auto component manufacturer Eastman Auto and Power has appointed Rajesh Jindal as Chief Executive Officer.

He comes with over 34 years of corporate experience spanning sales, marketing and product management, following a 24-year tenure at Amara Raja Energy and Mobility, where he most recently served as Chief Marketing Officer for automotive batteries in India.

Jindal holds a bachelor's degree in mechanical engineering alongside a Master of Business Administration qualification. During his career, he has managed distribution networks, channel partner relations and go-to-market strategies within the energy storage and automotive component sectors.

Shekhar Singal, MD, Eastman Auto and Power, said, "With over 34 years of experience, Jindal has garnered experience in sales, marketing and product development and is well-positioned to accelerate Eastman’s growth journey. As he begins this new chapter at Eastman, we look forward to his leadership in deepening our commitment for delivering sustainable value for our customers, partners, employees and stakeholders - advancing the company's long-term growth aspirations and inspiring the organisation to achieve new milestones together."

Established in 2000, Eastman Auto and Power operates across three business verticals: last-mile electric mobility solutions, residential solar storage systems and energy storage solutions.

The company employs over 3,600 personnel across seven manufacturing plants in India, supported by a distribution network of more than 1,200 direct partners and over 400 original equipment manufacturer clients worldwide.

Comments (0)

ADD COMMENT

Link Copied!

Kuraray America, Inc. (KAI) recently took part in the SAE International Thermal Management Systems Symposium, held on 6–7 October 2026 in Dearborn, Michigan. The event gathered mobility-industry professionals to discuss technologies and emerging challenges in vehicle thermal management. Throughout the two-day symposium, the Kuraray GENESTAR team connected with attendees at Booth #19, sharing insights into high-performance engineering materials.

The team demonstrated how GENESTAR PA9T can meet demanding automotive application requirements. This heat-resistant polyamide engineering plastic was developed by Kuraray using unique monomers, combining low water absorption, high heat resistance, chemical resistance, dimensional precision and excellent moldability. It also offers electrical properties suitable for demanding electrical and electronic applications, including low water absorption, chemical resistance, moldability, insulation performance, thermal resistance and dimensional stability.

These characteristics make GENESTAR relevant for a broad range of electrical, electronic and automotive components. Kuraray lists automotive applications including connectors, relays, insulators and wire harnesses, while GENESTAR materials also serve in sliding, fuel and air-intake systems. The company reports use in automotive gears, bearings, piping and intercooler tanks, and the material is being considered for electric-vehicle applications as well.

The SAE symposium provided a forum for exchanging insights into evolving thermal management technologies. The 2026 programme covered battery and electronics cooling, climate control, alternative refrigerants and vehicle thermal engineering approaches. For Kuraray, participation enabled direct engagement with engineers and industry professionals about how high-performance materials can address increasingly complex automotive design requirements, with GENESTAR PA9T offering a material option where multiple performance demands must be met simultaneously.

Comments (0)

ADD COMMENT

Link Copied!

Highway Roop Precision Technologies, a Carlyle-backed manufacturer of precision torque and control components, has completed the acquisition of Chamundi Die Cast, which manufactures complex aluminium die-cast components for automotive and industrial applications.

The transaction adds integrated aluminium die-casting and machining capabilities to Highway Roop's existing forging and precision-machining operations across steering, transmission and powertrain systems.

The acquisition expands Highway Roop’s product portfolio into lightweight vehicle solutions and electric vehicle components, while establishing a manufacturing footprint in South India alongside Chamundi's existing customer base in India, North America and Europe.

At present, Chamundi exports 60 percent of its products to global markets, while domestic business accounts for 40 percent. Interestingly, 98 percent of its business comes from the automotive industry, while the remaining comes from non-automotive sector.

Mohit Oswal, Chairman, Highway Roop, said, “This acquisition is an important milestone in our journey to build Highway Roop into a scaled, diversified precision manufacturing platform anchored in mission-critical torque and control applications. Chamundi’s capabilities and customer relationships complement our existing strengths and strengthen our ability to serve customers across automotive and industrial applications. Together, we are building a stronger platform for the next phase of growth.”

Dharmesh Arora, Group CEO and Director, Highway Roop, said, “Chamundi meaningfully strengthens Highway Roop’s capabilities around our core focus on torque and control applications. Its integrated aluminum die-casting and precision-machining capabilities expand our ability to deliver complex, lightweight engineered solutions across vehicle technologies. Its South India manufacturing base also diversifies our footprint, brings us closer to key customers, and strengthens the resilience of our manufacturing network and supply chain. We are delighted to welcome the Chamundi team to Highway Roop and look forward to building a stronger platform together.”

Yasin Khan, Managing Director, Chamundi, said, “Over four decades, Chamundi has built a strong business anchored in engineering excellence, a committed workforce and long-standing customer relationships. We are pleased to partner with Highway Roop for the next phase of our journey and will continue to hold a stake in the combined entity. Highway Roop’s complementary capabilities and scale will enable us to build on this foundation, deepen our relationships with customers, and create new opportunities for our employees, as we grow together.”

Amit Jain, Partner and Head, Carlyle India Advisors, said, “This transaction reflects Carlyle’s continued commitment to building a scaled, differentiated precision manufacturing platform in India. Highway Roop has established itself as a trusted partner to global OEMs for mission-critical torque and control components, and Chamundi adds complementary capabilities that further strengthen its customer proposition. We remain focused on supporting Highway Roop as it scales its capabilities and builds towards becoming one of India’s leading precision manufacturing companies serving automotive and industrial customers globally.”

Following the completion of the acquisition, Chamundi's leadership will retain an equity stake in the combined entity as part of the integration into Highway Roop's global supply platform.

Comments (0)

ADD COMMENT

Link Copied!